Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Pacifica, CA | Copperleaf Contractors
Copperleaf Contractors provides independent CGI cabinet, countertop, and vanity installation and repair across Pacifica. We are not a CGI-authorized dealer or manufacturer affiliate. We’re a local Pacifica General Contractor that has spent years working with CGI products in coastal homes, and the one thing that sets our work apart here is that we plan for what Pacifica actually does to a kitchen or bath: salt air, hillside movement, and damp that never quite clears out. Call (833) 589-8173 for a free estimate.
Why Pacifica Residents Choose Us for CGI Service
Most contractors in Pacifica know how to hang a cabinet. Far fewer know what a CGI frameless cabinet does when a post-and-pier foundation creeps half an inch over a wet winter, or why a standard zinc hinge seizes after two seasons in Pedro Point fog. Noel Cavanaugh, our owner and general contractor, grew up in Sharp Park, where the marine layer taught him early that hardware choices are not cosmetic. He studied construction technology at Skyline College in San Bruno and spent nearly two decades on residential and light commercial projects up and down the San Mateo County coast before starting Copperleaf Contractors. Our crew has installed, repaired, and replaced CGI repair in South San Francisco and Pacifica kitchen and bath products in enough homes to know which components fail first and which ones hold. We stock coastal-rated hardware locally so a hinge or slide replacement does not stall a project for a week.
We are independent. That matters because it means we are not pushing a single catalog line or quietly steering you toward what we have sitting in a warehouse. If OEM CGI parts are the right call, we source them. If a stainless aftermarket slide outperforms the standard CGI hardware in Pacifica’s salt air, we tell you that too. Our interest is a kitchen or bath that still works in seven years, not a fast parts markup.
Styles & brands we work with
Common CGI Construction Problems We Solve in Pacifica
- Corroded hinges and drawer slides from salt fog. CGI’s standard hardware is fine for inland homes, but Pacifica’s coastal marine layer deposits salt on metal surfaces continuously. We regularly open CGI cabinets in Sharp Park and Linda Mar to find hinges that have rusted to the point of squealing or seizing. We replace them with stainless or coastal-rated hardware sized to the existing bore pattern so the doors sit exactly as they should.
- Frameless cabinets racking out of square on hillside foundations. Many of Pacifica’s mid-century homes sit on post-and-pier or stepped foundations. When the ground shifts, a frameless CGI cabinet has no face frame to hold its geometry. Doors bind, drawers misalign, and the cabinet box flexes. This is common in the hills above Sharp Park. We assess whether the movement is structural or cosmetic, then re-shim, re-align, or replace based on what the cabinet actually needs.
- CGI quartz countertops chipping along the edge on bluff-top installations. Quartz is hard, but it is not flexible. When a substrate flexes on a bluff-top home, the counter takes the stress. In Pedro Point especially, we have seen edge chipping where the counter overhang extends beyond a shifting cabinet run. We install CGI quartz with a flexible adhesive and proper support blocking to absorb minor movement.
- Delaminating vanity cabinets in under-ventilated Pacifica bathrooms. The fog belt means bathrooms stay damp longer than they do in San Bruno or Daly City. Without a properly rated bath fan or passive ventilation, moisture works behind the vanity and breaks down the cabinet back panel. We replace water-damaged CGI vanity boxes and install them with sealed edges and moisture-rated backing.
- Drawer slides seizing in second-floor coastal kitchens. Salt air concentrates wherever you are closest to the surf line, and second-floor kitchens on the Pedro Point and Linda Mar edge get it worst. We have pulled CGI drawer slides that have essentially welded themselves shut with rust. The fix is a full slide replacement with a sealed, stainless-bearing unit and a quick check of the cabinet box for swelling.
CGI Service in Pacifica: What Local Conditions Mean for Your Equipment
On the bluff-top streets of Pedro Point and the Sharp Park/Linda Mar edge, any kitchen or bathroom remodel that adds square footage or a new deck triggers geotechnical reports and coastal permits because of eroding bluff setbacks and hillside creep. This is not a formality. It changes how CGI cabinets and vanities have to be installed. When the ground under a home can move a fraction of an inch seasonally, a frameless cabinet run needs to be set with that movement accounted for: larger tolerance gaps, flexible adhesive under countertops, hardware that will not bind the first time the foundation settles. Inland Peninsula projects rarely require this level of preparation. A contractor who treats a Pedro Point kitchen the same way as a San Mateo kitchen is going to hand you doors that stick within two years. Noel’s standing rule on these sites is simple: know the site before you touch it. That is why we read the existing structure, look at the foundation type, and check the exposure before we order a single cabinet box.
CGI Models & Products We Service in Pacifica
Our team works across the CGI product range, including CGI repair in Broadmoor and across Pacifica homes. That includes the CGI Ready-to-Assemble All-Wood Series kitchen cabinets, CGI Euro-Style Frameless Cabinets, the CGI Quartz Countertops Coastal Collection, and CGI Vanity Cabinets in both Shaker and Flat-Panel lines. We service all of them under one roof, from full installs to targeted repairs.
When a part is available as OEM and the original hole pattern lines up cleanly, we use it to preserve the exact finish and fit. But Pacifica’s climate sometimes argues against a straight OEM replacement. A zinc CGI hinge is going to corrode again in three seasons. A stainless, coastal-rated aftermarket hinge with the same bore spacing will outlast it by a decade. We make that call based on the location of the home and the exposure level, and we show you both options before we install anything.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Pacifica
Pricing for CGI work in Pacifica follows the scope of the job, not a flat menu. A vanity swap in a flat Linda Mar single story is a different project from a bluff-top full kitchen with foundation movement and coastal permitting. Here are the line items:
| Service | Pacifica Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
What drives the final number is substrate condition, cabinet count, hardware grade, and whether a geotech or coastal permit lands in scope. Every estimate we write is a line-item quote, not a round number. Call (833) 589-8173 to schedule a free estimate, and we will walk the site before quoting anything.
Serving Pacifica, CA — Our Local Coverage Area
We’re based in the Pacifica area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Pacifica
Salt fog is the main culprit. Pacifica’s marine layer deposits chloride on metal surfaces, and standard CGI hinges and slides are not made for that exposure. Within a few seasons the hardware rusts and the moving parts begin to bind. The fix is replacing the hardware with stainless or coastal-rated equivalents, and we do that work without changing the cabinet’s footprint or door alignment. Call (833) 589-8173 for a hardware assessment.
If the cabinet installation is part of a remodel that adds square footage or a new deck on a bluff-top lot, yes, a geotechnical report and coastal permit are typically required. A straight cabinet replacement inside the existing footprint usually is not trigged. We scope this on the first visit so you know what your specific project requires before you spend money on materials.
Yes, with the right installation. CGI quartz itself is non-porous, so salt air and humidity will not stain it. The weak point is the substrate underneath. If the base flexes from hillside movement, the quartz edges can chip. We install with flexible adhesive and proper blocking to absorb that movement, which is standard practice on our Pacifica quartz jobs.
We address the moisture, not just the wood. That starts with sealed edges on the vanity box, a moisture-rated backing panel, and checking that your bath fan actually moves air. If the fan is undersized or venting into the attic, no vanity sealed tight enough will fix the problem. We flag that during the estimate and quote the vanity work accordingly.
Refacing CGI cabinets in Pacifica typically runs $4,000 to $13,000 depending on door count, hinge replacement, and hardware grade. Full replacement, including new boxes and installation, lands inside the $14,000 to $45,000 range for a kitchen. If the boxes are square and dry, refacing with stainless hardware is usually the smarter spend. Call (833) 589-8173 and we will give you an honest read on which way to go for your specific kitchen.
Service Areas Near Pacifica
We serve the full Pacifica coastline and the neighboring North Peninsula. That includes Pacifica service area neighborhoods like Sharp Park, Pedro Point, Linda Mar, and Fairmont. We also take on CGI projects in San Bruno, Colma, Broadmoor, and South San Francisco. Coastal conditions vary block by block out here, so we quote every job after seeing the site in person.
Book Your CGI Service in Pacifica Today
We just finished a full kitchen remodel in a 1960s stucco home on Pedro Point, where the original CGI cabinets had rusted hinges and drawers that stuck. The homeowner now has frameless CGI cabinets with stainless hardware and a quartz countertop installed with movement in mind. Same-day visits are available for Pacifica repair estimates. Call (833) 589-8173 to get on the schedule, or reach out through CGI sales & service and we will walk you through your options.
Written by Noel Cavanaugh, Owner at Copperleaf Contractors, serving Pacifica since the company’s first coastal remodel.